Crestron® Cable Retractors offer a refined solution for Crestron FlipTop™ cable management systems. Each cable pulls out smoothly to a length of 3 f t (0.9 m ) and latches in position. A second pull of the cable releases the latch and retracts the cable back into the compartment.

Each Crestron Cable Retractor features a patented mechanism that dampens the rate of retraction to prevent the cable from whipping as it pulls back into the FlipTop storage compartment. The retraction speed is installer adjustable to ensure full and effortless retraction without excessive force.

Up to three, four, or six cable retractors may be installed depending on the FlipTop model . Spacer inserts are available to fill any unused cable retractor slots.1

Cable retractors may be mounted vertically or horizontally . In the vertical position, the retractors hang straight down from the bottom of the FlipTop box allowing them to be hidden in a pedestal leg or similar space directly beneath the FlipTop. When positioned horizontally, the retractors project to the sides or front of the FlipTop, eliminating any obstruction near the floor.

A 7 f t (2.1 m ) long tail is provided at the back-end of each cable retractor beneath the tabletop. This tail may be plugged into a wall plate or floor box, or connected to a DigitalMedia™ transmitter or similar interface device mounted under the table.

Several models of cable retractors are offered to support HDMI®3, DisplayPort™2, VGA, stereo audio, USB, and CAT5e connectivity. The CAT5e model is suitable for Ethernet, HDBaseT®, and DigitalMedia 8G+® applications.

CBLR2 series cable retractors may be installed in place of, or in combination with, existing 1st generation CBLR series cable retractors.3

To configure a complete 600 Series FlipTop with your choice of finishes, cables, cable retractors, connector plates, and power outlets, use the online Crestron FlipTops Configuration Tool.

Key Features

• Connectivity for FlipTops™ cable management systems
• Keeps interface cables at-the-ready
• Eliminates hanging cable loops beneath the table
• Cable pulls out smoothly to a length of 3 ft ( 0.9 m), and retracts by simply lifting it vertically above the table
• Provides a 7 ft (2.1m) long tail below the table
• Patented mechanism prevents cables from whipping while retracting
• Models support HDMI® 2 , DisplayPort™ , VGA, stereo audio, USB, Ethernet, HDBaseT®, and DigitalMedia 8G+® connectivity
• Vertical and horizontal mounting options accommodate most tabletop applications